Module 5: Mini Project – Simple Keychain Design
|
Printed by:
|
Gast
|
|
Date:
|
Friday, 20 November 2026, 10:05 PM
|
1. Model the Base Plate
- Open Tinkercad and start a new 3D design.
- Drag a solid Box onto the Workplane
- Click the dimension handles and set
- Length (X): 50 mm
- Width (Y): 25 mm
- Height (Z): 3 mm
- In the Shape Inspector, adjust the Radius slider to 2.0 to soften the corners and prevent sharp edges.
2. Cut the Keyring Hole
- Drag a striped Cylinder (Hole) onto the canvas
- Hold Shift and scale it down to 5 mm x 5 mm (leave height around 10-20 mm so it cuts clean through)
- Position it on the left side of the base plate, ensuring at least 3 mm of solid perimeter remains between the hole and the outer edge to prevent snapping under key-ring tension.
3. Add Raised Text
- Drag the Text tool from the Basic Shapes panel.
- In the text field, enter your name or word.
- Scale down the letters to fit within the 50 mm x 25 mm plate area.
- Set the text Height(Z) to 5 mm (this makes it stick up 2 mm above the 3 mm base plate.)
- Select both the base and text, press L (Align), and click the center dot along the vertical (Y) axis to center it.
4. Group and Export
- Select all objects using Ctrl + A (or Cmd + A)
- Press Ctrl + G to Group them into a single solid piece with the hole cut through.
- Click Export in the top right corner and choose .STL.
5. Slice and Print
- Open Bambu Studio and drag the exported .stl file onto the virtual build plate.
- Make sure the flat side of the base plate is lying flat on print bed.
- Apply these settings for durability:
- Layer Height: 0.20 mm Standard
- Wall Loops: 3 (strengthens the hole area)
- Infill: 15%-20% Gyroid
- Support: None needed.
- Multi-color look: Use the Fill/Paint tool in Bambu Studio to color the raised lettering.
- Click Slice Plate, then send it to print.