Module 5: Mini Project – Simple Keychain Design
5. Slice and Print
- Open Bambu Studio and drag the exported .stl file onto the virtual build plate.
- Make sure the flat side of the base plate is lying flat on print bed.
- Apply these settings for durability:
- Layer Height: 0.20 mm Standard
- Wall Loops: 3 (strengthens the hole area)
- Infill: 15%-20% Gyroid
- Support: None needed.
- Multi-color look: Use the Fill/Paint tool in Bambu Studio to color the raised lettering.
- Click Slice Plate, then send it to print.